lands by transferring water or fertilizer to the soil and roots in the form of droplets that flow permanently by dedicated trains so that the water pressure is low so that it is evenly distributed to all plants and to ensure the needs of the roots of water and drip irrigation works on Moisturizing the soil and supplying the plants with the appropriate nutrients and drip irrigation system is one of the best known irrigation systems so far, which provide a lot of expenses to farmers and can produce pipes for this system, which is increasing demand through the pipeline My drip, which will talk about in detail.
Drip irrigation pipe production stages:
Low density polyéthylène is used in the manufacture of these pipes which are carried out in the following stages:
1 - Extrusion stage and the extruding of plastic materials during the parts of the production line.
2 - the stage of clouds and formation and where the withdrawal of plastic materials and forming in the form of pipes and laying trains.
3 - phase calibration of the diameter and through this stage measurement and calibration of the required diameter of the pipes and control.
4- Cooling stage and cooling process of the formed pipe.
5 - perforation stage in which the pipe is punctured in three different places with extreme precision.
6 - the stage of winding and packing
At this stage the tube wrapped in the form of a large reel and packaged
for the farmer later cut it according to the length it needs.
General specifications of the production line of drip irrigation pipes with a production capacity of 30 to 50 m / min:
1. The diameter of the finished product reaches 6, 12, 16 mm.
2 - thickness of the pipe wall from 0.4 to 1.2 mm.
3 - The distance between trains from 200 to 2000 mm.
- Read more: Olive oil production line.
- Read more: PVC plastic pipe production line
Parts and Components of Drip Irrigation Pipe Production Line:
1- A rotary system for sorting the trains and inserting them in the pipes.
2 - the main extruder.
3 - the system of control of the country Vvikum.
4- Cooling machine.
5. Cloud machine.
6 - punching machine.
7. Wrapping machine.
Technical specifications of parts of the drip irrigation pipe production line:
First Extruder:
1. The diameter of the snail is 65 mm.
2 - the ratio of length to diameter 1: 30.
3 - The speed of filtering trains to 300 pieces per minute.
4 - The speed of the introduction of trains in the pipes to 200 pieces per minute.
5 - power capacity of 45 kW.
Approximate dimensions: 30 * 2.5 * 2 m.
Second cooling machine:
1. The cooling system is characterized by the presence of a closed water circuit.
2 - The consumption of air to 2 cubic meters per minute.
Third Cloud Machine:
It reaches a speed of 20 to 100 meters per minute.
IV punching machine:
1- The speed of 60 to 180 times per minute.
2- Perforation shall be in Cervo system.
V. Wrapping machine:
1 - is a manual roll and up to 100 m per minute.
2- The engine is equipped with an inverter.
How to get a drip irrigation pipe production line:
You can get parts of the production line by searching for the best
companies and factories of production lines and negotiate with them on
the types of equipment and prices, etc. Most of these companies import
production lines from different countries such as Turkey, Taiwan, Italy
and China, which facilitates the selection of the most suitable
production line and buy it at prices market.
Successful Marketing Methods:
1- An outlet can be used to sell drip irrigation pipes for the production line.
2 - Can supply pipes for companies dedicated to the sale of irrigation equipment and equipment.
3- Participation in exhibitions under the supervision of the Ministry of Irrigation.
4 - The project can be announced in one of the famous newspapers.
